PUFF DINO PU Foam Cleanser

PUFF DINO PU Foam Cleanser

PU FOAM Cleaner, Industry Detergent

PUFF DINO PU foam cleanser removes uncured (wet) polyurethane foam from both inside and outside of the depensing gun. Sure it's good to clean the uncured foam touching on the other parts.
You can spray just with the adaptor nozzle, or the can may be connected to the applicator to flush the barrel.
It can clean for both 1-component and 2- component uncured polyurethane foam.
Comply with RoHS standard.

Special Features

• Two way use :
• Spray directly by putting the attached nozzle onto the valve of the can.
• Connecting the cleanser to the despensing gun and clean the barrel and other parts.
• The Cleanser only works for uncured (wet) PU foam.

How to use

• After finish processing PU foam, screw the cleanser tightly onto the gun.
• Pull the trigger for few times to let clean agent fully soak inside the gun.
• Let the clean agent soak for 15 minutes to ensure is fully clean.
• Pull the trigger and inject clean agent fully through the gun for one last time.
• Loosen the can and let remain clean agent flow out of gun.
• Push down the valve to clean the gun body and contact area then wait for it dry before store.
• If you need to use right after cleaning, pull the trigger until PU foam spray out. Ensure the clean agent is fully exhaust then it is proper PU foam.
• Use spray nozzle to clean: Put the red nozzle on the valve and hold the can upside down then aim to correct way to spray.

Specification

YOU MAY ALSO LIKE

• 

  PUFF DINO PU Foam - DIY

  ---

  PUFF DINO PU foam (polyurethane foam) is easy to use. After foam hardens, the foam will become semi-soft texture. The harden foam has heat preservation, soundproof, shockproof, electrical insulation and leakage proof effect. It can steady attach to clean and not greasy materials like concrete, stucco brick, asbestos, wood or artificial materials like polystyrene or another PU Harden foam.

  ---

• 

  PUFF DINO PU Foam - Professional

  ---

  1. This product is easy to use. After foam hardens, the foam will become semi-soft texture. It can steady attach to clean and not greasy materials like concrete, stucco brick, asbestos, wood or artificial materials like polystyrene or another PU Harden foam. 2. The PU foam is long lasting time, corrosion resistant, weatherability, decay resistance and Chemical resistance. 3. Expansion ratio is 38. This number may vary in different processing environment. 4. The coating has seal, filling and waterproof effect. 5. Once the foam fully hardened, it can be cut, glut and paint. 6. Comply with Taiwan CNS7774 standard, won't self combustion or helping combustion.

  ---

• 

  PU Foam Dispensing Gun - Classic

  ---

  Apply with professional PU foam can accurately control injection volume. It's cost savings and reduce the subsequent renovation work. The package also come with small injection beak to help apply PU foam in tiny gap. It is the best tool for professional construction.

  ---

---