PU Foam Dispensing Gun - Classic

PU Foam Dispensing Gun - Classic

PU Foam Dispensing Gun-Classic

Apply with professional PU foam can accurately control injection volume. It's cost savings and reduce the subsequent renovation work.
The package also come with small injection beak to help apply PU foam in tiny gap.
It is the best tool for professional construction.

Special Features

• It's classic type and very popular among customers.
• The post-positioned spring makes the foam mixed better and the gun more durable.
• Teflon coated with adapter.

How to use

• Before Use:
• Wearing protection gloves.
• Shake the bottle for about 30 seconds then screw into injection ho le. (DO NOT over screwing)
• Turn the bead control then pull down the trigger to inject chemical mix fully into dispensing gun.
• The flow amount can be adjusting by the control.
• After Use:
• Removing the can.
• Scratching off hardened foam form nozzle.
• Turn the bead control let remaining chemical flow out.
• Clean with PU foam cleaning agent immediately.
• Cautions When Switching Can:
• Only switching to new can when fully finished the last one.
• Take off empty can and do not pointing the valve to people.
• Use thin fabric to cleaning contact area and remove remaining foam.
• Screw in a new can in less than 1 minute. (Shaking the can before screw in)
• Pull the trigger to inject foam.
• Warning: Do not point the gun and valve to others when switching.
• Between Ever Use:
• One PU foam can is able to stay in dispensing gun for 7 days.
• Tightening bead control.
• Or screw off the can and clear with special cleaning agent before store.
• If the PU foam can is not yet finish use, you should clean exiting hole with special cleaning agent immediately.
• If the can is empty when you finish, clean with clear with special cleaning agent before store.

Specification

YOU MAY ALSO LIKE

• 

  PUFF DINO PU Foam - Professional

  ---

  1. This product is easy to use. After foam hardens, the foam will become semi-soft texture. It can steady attach to clean and not greasy materials like concrete, stucco brick, asbestos, wood or artificial materials like polystyrene or another PU Harden foam.2. The PU foam is long lasting time, corrosion resistant, weatherability, decay resistance and Chemical resistance.3. Expansion ratio is 38. This number may vary in different processing environment.4. The coating has seal, filling and waterproof effect.5. Once the foam fully hardened, it can be cut, glut and paint.6. Comply with Taiwan CNS7774 standard, won't self combustion or helping combustion.

  ---

• 

  PUFF DINO PU Foam Cleanser

  ---

  PUFF DINO PU foam cleanser removes uncured (wet) polyurethane foam from both inside and outside of the depensing gun. Sure it's good to clean the uncured foam touching on the other parts. You can spray just with the adaptor nozzle, or the can may be connected to the applicator to flush the barrel. It can clean for both 1-component and 2- component uncured polyurethane foam. Comply with RoHS standard.

  ---

• 

  PUFF DINO PU Foam - DIY

  ---

  PUFF DINO PU foam (polyurethane foam) is easy to use. After foam hardens, the foam will become semi-soft texture. The harden foam has heat preservation, soundproof, shockproof, electrical insulation and leakage proof effect. It can steady attach to clean and not greasy materials like concrete, stucco brick, asbestos, wood or artificial materials like polystyrene or another PU Harden foam.

  ---

---